Need some help/suggestions regarding computer that wont load intermittently.
Started months ago, vista would load, CPU maxes out for 3 minutes, then windows would continue loading normally, except for error message as follows:
RunDLL.exe
“Error loading C:\windows\system32\wvUnLCVP.dll
The specified module cannot be found”
This would only occur after having pressed the reset button on the computer because computer stops loading before windows starts loading, all that appears is a flashing white cursor on a black screen, when u reset, computer loads as per above.
Over the past couple days computer occasionally doesnt even get to this stage and says that the CPU fan has failed or isn’t fast enough, error resolves on reset, this has occurred twice now.
Of course, with the required resets and waiting for a few minutes every time vista loads, computer is otherwise fully functional.
Upon inspection inside computer all 3 fans seem to be running fine (CPU, GPU, PSU ? case has no separate fans)
Have since put a new HDD formatted with vista, still same CPU fan error on restart. This is consistent with the CPU fan error message occuring before windows even starts to load.
Any help is appreciated
thanks
Specs
Windows Vista Ultimate (6.0 Build 6002) Service Pack 2 32bit
Bios: Phoenix ? AwardBIOS v6.00PG
MB: Asus P5VD2-MX
CPU: Intel Core 2 Duo 6600 @ 2.40 GHz
RAM: 2046MB (2x1GB) (Kingston)
GPU: Nvidia Geforce 8800GS ? 1141MB
DVD: Pioneer DVD-RW DVR-111D ? IDE
HDD: Seagate SATA ? Barracuda 7200.10 ? 200GB
PSU: ATX-550W
BIOS Monitor:
CPU fan speed fairly stable @ 860 RPM (warning set at 800)
CPU Temp at 38 degrees C and MB at 26 degrees C
Start up Temp set at 50 degrees C and full speed at 70dC.
this is right after the comp has been turned on.
stats similar 2hr 40min later
—————-
Q-Fan Controller - Enabled
Vcore Voltage - 1.26
3.3V voltage - 3.36V
5V Voltage - 5.05V
12V line voltage at 11.89V
——
Start Up PWM - 60
Slope PWM - 4PWM/degree celcius
——-
PSU Brand - Some Asian letters then “Sun Pro”
- seems pretty generic to me
